Bishop Ammunition remanufactured 45 Auto (.45 ACP) cartridges are made in the U.S.A at our plant in North Highlands, California by U.S. Citizens. This ammunition uses top shelf, top grade modern powder that is not sensitive to either the temperature or position of the powder inside the case period. This powder yields constant pressure and velocity shot after shot after shot regardless of the condition in which it's used. We believe, when properly loaded and inspected, once-fired brass is every bit as reliable as new brass, if not more. Because once-fired brass has been, by definition, fired, it provides an advantage that new-made cartridges do not have: Simply put, the possibility that poorly formed primer holes would prevent ignition has been eliminated. Our processed brass undergoes an initial hand inspection, commercial-grade Scharch machine testing, a custom-designed cleaning and polishing process, another hand inspection, then the round is made on commercial-grade presses, and undergoes a final hand inspection before the ammunition is hand packed into the box. Just like when we use new brass, all cartridges go through the same intense quality control, high precision machining, and personal hand inspection.

• Match-Grade Ammunition.
  
• Each box contains 50 cartridges, mixed headstamp.  While our new brass is 100% American-made, our remanufactured brass, while mostly American-made, can contain a few foreign-made brass cases.
• A top-shelf, modern powder insures a more consistent cleaner burn regardless of temperature or firing position shot after shot after shot.
• 1/10th Grain Consistency = Increased Accuracy = Better Performance.
  
• We purposely do not load once-fired processed cases to maximum SAAMI specification, but it is within the range specified by the powder manufacturer. There is solid reasoning behind this: Our ammunition provides a lower recoil, less chance of case splits and less of a chance of blowing someone's gun up. Other manufacturers do fully load to maximum specification on their re-manufactured ammunition (not really advised), or they will use a cheaper, dirtier powder used in order to increase their profit margin.
• Our cases are cleaned using our own custom process, full length sized, roll sized and primer pockets resized and chamfered all back to new brass specifications.
  
• Primer, powder and bullet components are American-made where possible and supply allows.
  
• Our 50 cartridge box is a custom-designed U.S.-made, WWII-style environmentally-friendly ammunition box that uses no inserts. All cartridges are packed tight and facing the same direction - base down, bullet up.
• At this time, there is a shortage of nickle-plated brass, so we are using yellow brass until further notice. Regardless, we do not mix nickel-plated brass and yellow brass in the same box. Your order may contain some boxes of all brass cases and some boxes of all nickle-plate cases, depending on inventory levels, unless you specify otherwise.
  

It is our view, that people owning Glocks in 45 Auto caliber should never use reloaded ammunition as the case is not fully supported in the chamber. We have heard reports that the newest 4th gen Glocks do fully support the case, but it is up to you to KNOW whether yours does or not, and to KNOW that your weapon has been properly cleaned and in good working order prior to use.

Please see our updated return policy concerning ammunition returns.  MUST BE 21 OR OVER TO PURCHASE.
MUST BE 21 OR OVER TO PURCHASE.