Home > Firearms Marking and Engraving >

Firearms Marking
Firearms Laser Marking
Laser marked anodized aluminum


 

Includes 2 lines ot Text
Our Price: $50.00


Quantity in Stock:(Out of Stock)


Availability:: Subject to availability
Product Code: FIREARMSMARKING

AR/AK Barrel

1 Side Through Coating or with Cermark [Add $90.00]
2 Sides and Top Through Coating or with Cermark [Add $175.00]
2 Sides Through Coating or with Cermark [Add $150.00]
Entire Barrel Full Length Through Coating or with Cermark [Add $300.00]
AR/AK Bottom of Trigger Guard

Image or Text [Add $25.00]
None
AR/AK Muzzle Brake

1 Side Through Coating or with Cermark [Add $25.00]
2 Sides Through Coating or with Cermark [Add $50.00]
None
AR/AK Rifles Charging Handle

None
Text or Image [Add $25.00]
AR/AK Rifles Dust Cover

1 Side Text or Image [Add $25.00]
2 Sides Text or Image [Add $50.00]
None
AR/AK Rifles Hand Guard

1 Side Text [Add $75.00]
2 Sides Text [Add $100.00]
None
AR/AK Rifles Magazine Well

Image or Text within Marking area Right Side [Add $40.00]
None
AR/AK Rifles Trust Name

None
Trust Name and Number 1 Location [Add $35.00]
Trust Name and Number 2 Locations [Add $65.00]
Trust Name and Number 3 Locations [Add $90.00]
AR/AK Rifles Upper Receiver

None
Text or Image 1 side [Add $150.00]
Text or Image 2 sides [Add $250.00]
Firearms Marking Included Text

1 Line Additional Text
2 Lines Additional Text
3 Lines Additional Text
4 Lines Additional Text
First 2 Lines of Text
None
Pistol Marking Along Barrel

Marking Along Barrel 1 Side
Marking Along Barrel 2 Sides
Marking Along Barrel 2 sides and Top
Marking Along Barrel 2 sides, Top and Bottom
None
Pistol Marking Back Plate

Mark Back Plate with Graphic or Text
None
Pistol Marking Barrel End

Mark Barrel End with Text
None
Pistol Marking Barrel Side

Mark Barrel 1 Side at Ejection Port
None
Park Barrel 2 Sides at Ejection Port
Pistol Marking Sides

None
2 lines Text
Pistol 1 Slide Graphics [Add $75.00]
Pistol 2 Slides and Top Graphics [Add $200.00]
Pistol 2 Slides Graphics [Add $150.00]
Pistol Back Plate [Add $20.00]
Pistol Barrel 1 Side and Top Ejection Port [Add $40.00]
Pistol Barrel 1 Side Ejection Port [Add $25.00]
Pistol Barrel Along Side of Barrel [Add $65.00]
Pistol Magazine Base Plate [Add $25.00]

Qty:  
Description
 
Why Laser Marking?

The importance of laser marking for firearms cannot be overstated. Some of the reasons to opt for this service are:

1) It h
elps in identity and protection of your firearms by giving them specific identification numbers that cannot be changed.
2) The mark is permanent so long as the anodization is not removed or painted over.
3) Personalization of your firearm makes it unique to you and sets you apart from everyone else.

We provide custom solutions to your marking needs developed in accordance with client and application requirements. By using state of the art CO2 commercial lasers, we provide high quality professional results in quick turnaround time within expected time frames.

The permanent nature of laser marking your firearm or part results in a customized firearm with any graphic, logo, or text. We work with you to provide results that will meet your expectations. We ensure complete customer satisfaction.

We will help you have a custom marked AR-15 lower receiver, an individual part or an entire firearm with incredible detail and with results that will turn your firearm into a piece of art. We are able to use your lower receiver, a lower receiver supplied by us, or other firearms part. If you elect to use our lower receiver which is forged out of 7075 Aluminum, machined to mil-spec standards, heat treated, and anodized to mil-spec requirements it must be shipped to a FFL in your community who who will do the background check and transfer to you. Or we can mark your lower receiver if you send it to us. If we use your lower receiver then it will be shipped directly back to you.

With our state of the art lasers we are able to offer laser marking which is a surface etch of the anodization on the lower receiver turning it white. This is NOT a deep engraving. You cannot color fill this mark. However, virtually any graphic, picture, logo, or text may be marked on a anodized firearm part. 3D engraving. Really make your logo/graphic stand out and be a cut above the rest.

E
ngraving Areas

Wi
th our state of the art lasers, you have your choice of getting custom text or logos on the magazine well, either side but usually the right, text above the fire control area on either side, and engraving under the trigger guard. NOTE laser marking will NOT make a engraving that meets ATF minimum requirements for manufacturers. You must use deep engraving to meet ATF Requirements. We can do both marking and deep engraving. If you want to have your rifle finished in Cerakote or paint, you MUST use deep engraving for all markings.

Graphics

We can engrave most graphics including some really high detailed images because of the finite control on our machine, all we usually require is a good quality image to use to program our laser. If you have a vector file, even better! If you have questions about your specific graphic please send it to one of our specialists using the contact us form so we can best advise you on how to make your design awesome and create a truly custom AR15 lower.

Engraving Ideas

Names / Logos
Your Business Logo or text including your business card
Text & Slogans
Engrave a tribute to a friend, loved one or some person special in your life to preserve their memory
Caliber Designations - Show off your unique caliber
Armed Forces Logos
Law Enforcement, Police, Fire, EMT Logos
Engrave law enforcement badges
Pro 2nd Amendment Graphics
Engrave the 2nd Amendment
Family Names/Crests
Patriotic flags, state flags, state seals
Hunting scenes such as wild hogs, deer, dogs, fowl, elk, moose, bear, etc.

Anything else you can imagine

We will take the utmost care with each and every order ensuring that the laser marking of your lower receiver, part or firearms goes smoothly. You will end up with a high quality lower, part or firearms that you will be proud to show everyone. We will work with you to ensure that your graphics are engravable and will turn out as best as possible and meet or exceed your expectations. If we do not believe the engraving will not meet our standards we will let you know before we start to assure that the result is what you intend. Please feel free to ask any questions before ordering and we will be more than happy to assist you with your project.

Lower Options

We are an FFL dealer so you may send us a existing lower receiver you currently own. This will save money. If you are starting from scratch we would be happy to supply our own lower receiver already deep engraved with our information and serial number. If you are building a 80% lower, we will NOT finish the milling of your lower. We will place your serial number on it and the required information to meet ATF and The State of California requirements. If you are building an assault rifle and you are in California, you MUST apply to The State of California for a serial number and provide proof of the serial number as provided by The State of California and that your firearm or lower receiver is registered as an assault weapon.

Shipping Legalities

IF you send us a lower that you currently own, we will ship it directly back to you. If you are purchasing a new lower from us, it will be shipped to your local FFL licensed dealer for a background check and transfer.

Firearms Disassembly, Reassembly, Function and Firing Testing

Take your firearm apart for laser marking, cleaning if necessary, reassembly, function testing, test fire your firearm is billed at $45.00 per hour with a minimum of 2 hours. Most firearms will not take more than 2 hours for this service. Please, if you are competent at cleaning, taking your firearm appart, and putting it back together just send us the parts you wish to have engraved. However, if you desire for your firearm to be shipped to use for our in house service it must be shipped fully assembled or it will not be accepted by us and will be returned to you and it will not be marked.
Features
  • Permanent Mark
    This is not Deep Engraving
    Makes your firearm Unique

Share your knowledge of this product with other customers... Be the first to write a review

Browse for more products in the same category as this item:

Firearms Marking and Engraving